Cisco 200-301 Dumps 2023 | Let Your Exam Be Free Of Rainy Days

help you pass the  200-301 exam easily

Rain is always unpleasant, do you want your CCNA 200-301 exam to be rainy? Always full of pleasure? Then follow in our footsteps, we have updated the Cisco 200-301 dumps 2023 to help you pass the exam quickly, with no rainy days!

Cisco 200-301 exam terminator – Pass4itSure 200-301 dumps 2023

Download it, practice the 200-301 exam questions inside, and the success of the exam is yours.

Pass the 200-301 exam through the rain without fear

Are you looking for comprehensive and practical Cisco 200-301 dumps to get your exam in the groove mood without a rainy day?

Pass4itSure is the perfect choice for you. Pass4itSure offers the Cisco 200-301 dumps 2023 to help you get through the exam preparation period with the highest possible score.

Careful preparation plan

The 200-301 exam examines candidates’ knowledge and skills in networking fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation and programmability.

To pass, careful preparation and planning are required.

Next, we’ll discuss what a plan is

If you are looking for a thorough preparation plan for the 200-301 exam, please consider downloading the latest 200-301 exam dumps.

Here is the recommendation of Pass4itSure. It updates the 200-301 dumps 2023 and contains not only PDFs but also VCEs. All exam questions are distilled from expert preparation and continuous feedback, and authenticity is guaranteed.

This way, your preparation is easy and efficient.

Having said that, I have to share some practicals, such as the latest 200-301 exam questions

Of course, it’s still from Pass4itSure.

Question 1:

A WLC sends alarms about a rogue AP, and the network administrator verifies that the alarms are caused by a legitimate autonomous AP.

A. Place the AP into manual containment.

B. Remove the AP from WLC management.

C. Manually remove the AP from the Pending state.

D. Set the AP Class Type to Friendly.

Correct Answer: B

Question 2:


Drag and drop the IPv6 addresses from the left onto the corresponding address types on the right.

Select and Place:

latest 200-301 exercises q2

Correct Answer:

latest 200-301 exercises q2-2

Question 3:

Refer to the exhibit. Users on existing VLAN 100 can reach sites on the Internet. Which action must the administrator take to establish connectivity to the Internet for users in VLAN 200?

latest 200-301 exercises q3

A. Define a NAT pool on the router.

B. Configure static NAT translations for VLAN 200.

C. Configure the ip nat outside command on another interface for VLAN 200.


Correct Answer: D

Question 4:

What are the two differences between WPA2 and WPA3 wireless security? (Choose two.)

A. WPA2 uses 192-bit key encryption, and WPA3 requires 256-bit key encryption.

B. WPA3 uses AES for stronger protection than WPA2, which uses SAE.

C. WPA2 uses 128-bit key encryption, and WPA3 supports 128-bit and 192-bit key encryption.

D. WPA3 uses SAE for stronger protection than WPA2, which uses AES.

E. WPA3 uses AES for stronger protection than WPA2, which uses TKIP.

Correct Answer: CD

Question 5:

Which technology can prevent client devices from arbitrarily connecting to the network without state remediation?

A. 802.1x

B. IP Source Guard

C. MAC Authentication Bypass

D. 802.11n

Correct Answer: A

Question 6:

What are the two benefits of private IPv4 IP addresses? (Choose two.)

A. They are routed the same as public IP addresses.

B. They are less costly than public IP addresses.

C. They can be assigned to devices without Internet connections.

D. They eliminate the necessity for NAT policies.

E. They eliminate duplicate IP conflicts.

Correct Answer: BC

Question 7:


Drag and drop the IPv4 network subnets from the left onto the correct usable host ranges on the right.

Select and Place:

latest 200-301 exercises q7

Correct Answer:

latest 200-301 exercises q7-2

This subnet question requires us to grasp how to subnet very well. To quickly find out the subnet range, we have to find out the increment and the network address of each subnet. Let\’s take an example with the subnet

From the /18 (= 1100 0000 in the 3rd octet), we find out the increment is 64. Therefore the network address of this subnet must be the greatest multiple of the increment but not greater than the value in the 3rd octet (228).

We can find out the 3rd octet of the network address is 192 (because 192 = 64 * 3 and 192 < 228) -> The network address is So the first usable host should be and it matches with the 5th answer on the right. In this case, we don’t need to calculate the broadcast address because we found the correct answer.

Let \’s taking another example with subnet -> The increment is 2 (as /23 = 1111 1110 in 3rd octet) -> The 3rd octet of the network address is 228 (because 228 is the multiply of 2 and equal to the 3rd octet) ->

The network address is -> The first usable host is It is not necessary but if we want to find out the broadcast address of this subnet, we can find out the next network address, which is 172.28.

(228 + the increment number).0 or then reduce 1 bit -> is the broadcast address of our subnet. Therefore the last usable host is

Question 8:

Why would an administrator choose to implement an automated network management solution?

A. to reduce operational costs

B. to support simpler password policies

C. to enable “box by box” configuration and deployment

D. to limit recurrent management costs

Correct Answer: A

Question 9:

Refer to the exhibit. When PC-A sends traffic to PC-B, which network component is in charge of receiving the packet from PC-A verifying the IP addresses, and forwarding the packet to PC-B?

latest 200-301 exercises q9

A. Layer 2 switch

B. Router

C. Load balancer

D. firewall

Correct Answer: B

PC–A and PC-B are not in the same network. Switches send traffic in layer 2 and within the same VLA while routers route traffic to different subnets and at layer 3.

Question 10:

Why implement VRRP?

A. to provide end users with a virtual gateway in a multivendor network

B. to leverage a weighting scheme to provide uninterrupted service

C. to detect link failures without the overhead of Bidirectional Forwarding Detection

D. to hand over to end users the autodiscovery of virtual gateways

Correct Answer: A

Question 11:

What provides connection redundancy increased bandwidth and load sharing between a wireless LAN controller and a Layer 2 switch?

A. VLAN trunking

B. tunneling

C. first hop redundancy

D. link aggregation

Correct Answer: D

Question 12:

Several new coverage cells are required to improve the Wi-Fi network of an organization. Which two standard designs are recommended? (Choose two.)

A. 5GHz provides increased network capacity with up to 23 nonoverlapping channels.

B. 5GHz channel selection requires an autonomous access point.

C. Cells that overlap one another are configured to use nonoverlapping channels.

D. Adjacent cells with overlapping channels use a repeater access point.

E. For maximum throughput, the WLC is configured to dynamically set adjacent access points to the same channel.

Correct Answer: AC

Question 13:

Refer to the exhibit.

latest 200-301 exercises q13

An OSPF neighbor relationship must be configured using these guidelines:

R1 is only permitted to establish a neighbor with R2 R1 will never participate in DR elections R1 will use a router id of 101.1.1.

Which configuration must be used?

latest 200-301 exercises q13-2

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: C

Question 14:

Which two command sequences must be configured on a switch to establish a Layer 3 EtherChannel with an open-standard protocol? (Choose two.)

A. interface GigabitEthernet0/0/1 channel-group 10 mode auto

B. interface GigabitEthernet0/0/1 channel-group 10 mode on

C. interface port-channel 10 no switchport ip address

D. interface GigabitEthernet0/0/1 channel-group 10 mode active

E. interface port-channel 10 switchport switchport mode trunk

Correct Answer: CD

Question 15:

What is the same for both copper and fiber interfaces when using SFP modules?

A. They support an inline optical attenuator to enhance signal strength

B. They provide minimal interruption to services by being hot-swappable

C. They offer reliable bandwidth of up to 100 Mbps in half-duplex mode

D. They accommodate single-mode and multi-mode in a single module

Correct Answer: B

Cisco 200-301 dumps questions 2023 in the PDF format free download:

You can practice the above exam questions first, of course, these are not enough, you need the latest 200-301 dumps 2023 all questions 1205+. Use Pass4itSure 200-301 dumps and take the exam worry-free!