Choose Excellent Online Resources 350-401 Dumps To Pass The Exam

350-401 Dumps 2023

How do I pass the CCNP 350-401 exam, you ask? I definitely tell you to choose the excellent online resource 350-401 dumps to pass the exam. So which is an excellent online resource?

Pass4itSure 350-401 dumps just updated in May and is eligible, welcome to download the latest 350-401 dumps https://www.pass4itsure.com/350-401.html easily pass the exam.

When it comes to passing the 350-401 exam, first of all, you need to know what kind of exam you need to challenge.

The 350-401 exam is a certification exam from Cisco Corporation, also known as the Implementing and Running Cisco Enterprise Networking Core Technology (ENCOR) exam.

This exam leads to the Cisco Enterprise Networking Specialist (CCNP Enterprise) certification, which demonstrates that you have the skills and knowledge required to implement and manage complex network solutions in enterprise-class networks.

Why do you need excellent 350-401 dumps with online resources?

Because excellent 350-401 dumps will provide you with the latest practice questions.

Passing the 350-401 exam requires the help of the latest exam questions, as the exam regularly updates its exam content and question bank to keep pace with the latest trends and developments in enterprise networking technologies.

If you use outdated exam questions or reference materials, you may lose your chances on the exam and not be successful.

At the same time, by using the help of the latest exam questions, you can better understand the difficulty and structure of the exam and have a higher degree of confidence when preparing for and responding to it.

Speaking of 350-401 exam questions, Pass4itSure also prepares the latest exam questions for you to practice for free.

[May 2023] 350-401 dumps latest Cisco 350-401 questions

Q1:

What are the characteristics of traffic policing?

A. lacks support for marking or remarking

B. must be applied only to outgoing traffic

C. can be applied in both traffic directions

D. queues out-of-profile packets until the buffer is full

Correct Answer: D


Q2:

Refer to the exhibit.

free 350-401 exam questions q2

MTU has been configured on the underlying physical topology, and no MTU command has been configured on the tunnel interfaces. What happens when a 1500-byte IPv4 packet traverses the GRE tunnel from host X to host Y, assuming the DF bit is cleared?

A. The packet arrives on router C without fragmentation.

B. The packet is discarded on router A

C. The packet is discarded on router B

D. The packet arrives on router C fragmented.

Correct Answer: D

free 350-401 exam questions q2-2

Q3:

How does the EIGRP metric differ from the OSPF metric?

A. The EIGRP metric is calculated based on bandwidth only. The OSPF metric is calculated on delay only.

B. The EIGRP metric is calculated based on delay only. The OSPF metric is calculated on bandwidth and delay.

C. The EIGRP metric Is calculated based on bandwidth and delay. The OSPF metric is calculated on bandwidth only.

D. The EIGRP metric Is calculated based on hop count and bandwidth. The OSPF metric is calculated on bandwidth and delay.

Correct Answer: C

By default, the EIGRP metric is calculated:

metric = bandwidth + delay

While OSPF is calculated by:

OSPF metric = Reference bandwidth / Interface bandwidth in bps (Or Cisco uses 100Mbps (108) bandwidth as reference bandwidth.

With this bandwidth, our equation would be:

Cost = 108/interface bandwidth in bps)


Q4:

Which two functions is an edge node responsible for? (Choose two.)

A. provides multiple entry and exit points for fabric traffic

B. provides the default exit point for fabric traffic

C. provides the default entry point for fabric traffic

D. provides a host database that maps endpoint IDs to a current location

E. authenticates endpoints

Correct Answer: AD


Q5:

Refer to the exhibit.

free 350-401 exam questions q5

Hosts PC1 PC2 and PC3 must access resources on Serve 1. An engineer configures NAT on Router R1 1e to enable communication and enters the show command to verify the operation. Which IP address is used by the hosts when they communicate globally to Server1?

A. 155.1.1.1

B. randorm addresses in the 155.1.1.0/24 range

C. their own address in the 10.10.10.0/24 rance

D. 155.1.1.5

Correct Answer: A

from the inside host perspective the global address is 15.1.1.1


Q6:

Which two statements about HSRP are true? (Choose two)

A. It supports unique virtual MAC addresses

B. Its virtual MAC is 0000.0C07.ACxx

C. Its default configuration allows for pre-emption

D. It supports tracking

E. Its multicast virtual MAC is 0000.5E00.01xx

Correct Answer: BD


Q7:

Why would a log file contain a * next to the date?

A. The network device was receiving NTP time when the log messages were recorded

B. The network device was unable to reach the NTP server when the log messages were recorded.

C. The network device is not configured to use NTP

D. The network device is not configured to use NTP time stamps for logging.

Correct Answer: C

“Network device is not configured to use NTP” is the only answer which may justify the fact that system clock has not been set and thus date and time are preceded by an asterisk (*),


Q8:

Refer to the exhibit.

free 350-401 exam questions q8

An engineer must protect the CPU of the router from high rates of NTP, SNMP, and SSH traffic. Which two configurations must be applied to drop these types of traffic when it continuously exceeds 320 kbps? (Choose two)

A. R1(config-pmap)#class CLASS-CoPP-Management R1(config-pmap-c)#police 32 conform-action transmit exceed-action drop violate-action transmit

B. R1(config)#policy-map POLICY-CoPP R1(config-pmap)#class CLASS-CoPP-Management R1(config-pmap-c)#police 320000 conform-action transmit exceed-action drop violate-action drop

C. R1(config)#policy-map POLICY-CoPP R1(config-pmap)#class CLASS-CoPP-Management R1(config-pmap-c)#police 320000 conform-action transmit exceed-action transmit violate-action drop

D. R1(config)#control-plane R1(config-cp)# service-policy output POLICY-CoPP

E. R1(config)#control-plane R1(config-cp)# service-policy input POLICY-CoPP

Correct Answer: CE

“continuously” would imply that occasionally exceeding 320kbps is ok. “exceed drop” will not allow it to ever go above it.


Q9:

Refer to the exhibit. Which command must be applied to R2 for an OSPF neighborship to form?

free 350-401 exam questions q9

A. network 20.1.1.2.0.0.0.0 area 0

B. network 20.1.1.2 255.255.0.0. area 0

C. network 20.1.1.2.0.0.255.255 area 0

D. network 20.1.1.2 255.255.255 area 0

Correct Answer: A

The network 20.0.0.0 0.0.0.255 area 0 command on R2 did not cover the IP address of the Fa1/1 interface of R2 so OSPF did not run on this interface. Therefore we have to use the command network 20.1.1.2 0.0.255.255 area 0 to turn on OSPF on this interface.

Note: The command network 20.1.1.2 0.0.255.255 area 0 can be used too so this answer is also correct but answer C is the best answer here. The network 0.0.0.0 255.255.255.255 area 0 command on R1 will run OSPF on all active


Q10:

An engineer failed to run diagnostic commands on devices using the Cisco DNA center, which action in the Cisco DNA center resolves the issue?

A. Enable Secure Shell.

B. Enable Command Runner.

C. Enable APIs

D. Enable CDP.

Correct Answer: A


Q11:

What does the destination MAC on the outer MAC header identify in a VXLAN packet?

A. the emote spine

B. the next hop

C. the leaf switch

D. the remote switch

Correct Answer: B


Q12:

Refer to the exhibit.

free 350-401 exam questions q12

After configuring the BGP network, an engineer verifies that the path between Servers and Server2 Is functional. Why did RouterSF choose the route from RouterDAL instead of the route from RouterCHI?

A. The Router-ID Tor Router DAL is lower than the Roter-ID for RouterCHI.

B. The route from RouterOAL has a lower MED.

C. BGP is not running on RouterCHI.

D. There is a static route in RouterSF for 10.0.0.0/24.

Correct Answer: A


Q13:

What ate the two characteristics of Cisco SD-Access elements? (Choose two )

A. The border node is required for communication between fabric and nonfabric devices.

B. Fabric endpoints are connected directly to the border node

C. Traffic within the fabric always goes through the control plane node

D. The control plane node has the full RLOC-to-EID mapping database

E. The border node has the full RLOC-to-EID mapping database

Correct Answer: AD


Q14:

Which technology reduces the implementation of STP and leverages both unicast and multicast?

A. VSS

B. VXLAN

C. VPC

D. VLAN

Correct Answer: B


Q15:

Refer to the exhibit. Which command set changes the neighbor state from Idle (Admin) to Active?

free 350-401 exam questions q15

A. R1(config)#router bgp 65002 R1(config-router)#neighbor 192.168.50.2 activate

B. R1(config)#router bgp 65001 R1(config-router)#neighbor 192.168.50.2 activate

C. R1(config)#router bgp 65001 R1(config-router)#no neighbor 192.168.50.2 shutdown

D. R1(config)#router bgp 65001 R1(config-router)#neighbor 192.168.50.2 remote-as 65001

Correct Answer: C

Idle (Admin) means that the BGP session is in a shutdown state, so we have to turn it on with the “no neighbor 192.168.50.2 shutdown” command


Conclusion:

How to pass the 350-401 exam easily? We recommend you to the great online resource Pass4itSure 350-401 dumps 2023 https://www.pass4itsure.com/350-401.html to prepare for the Cisco 350-401 exam.