You’ll need to pay attention to the updated HPE0-S57 dumps if you want to pass the HP HPE ASE HPE0-S57 exam. We have updated HPE0-S57 dumps to be the most complete Designing HPE Hybrid IT Solutions study materials in preparation for the HPE0-S57 exam.
Download HPE0-S57 dumps: https://www.pass4itsure.com/hpe0-s57.html Get a complete selection of HPE0-S57 exam study materials (exam practice questions 127+), study hard, and pass the Design HPE Hybrid IT Solutions exam to get a certificate.
Read HPE0-S57 free exam dumps online: https://drive.google.com/file/d/1Xgva2jdfXOR6rjZdNfyHcbeluTPl2d0o/view?usp=sharing
Do you know the important points? HPE0-S57 exam?
To save you time and read clearer, the designing HPE Hybrid IT Solutions exam essentials are summarized:
Exam Code: HPE0-J68
Exam Type: Proctored
Exam Duration: 1 hour 30 minutes
Total questions: 60 questions
Passing Score Passing Score: 63%
Language: English, Japanese, Korean
Prerequisites for taking this exam:
You need an HPE Learner ID and a Pearson VUE login and password
Best study material: Pass4itSure HPE0-J68 Dumps
Official resources:
HPE Storage Solutions, Rev. 22.11
HPE ASE Storage Solutions V4 Study Guide
Are there HP HPE0-S57 exam questions for prep?
Yes, Pass4itSure will provide you with the best HPE0-S57 exam study materials (HPE0-S57 dumps) with HPE0-S57 exam questions, which you can get on the Pass4itSure website, or try the free HPE0-S57 exam questions below.
Get Updated HPE0-S57 Dumps Q&A (Free Sample Questions)
QUESTION # 1
Which statement is correct when comparing functionalities of the AF, CF, and SF series in the nimble storage portfolio?
A. Zero copy clones are a unique feature of the all-flash array within the nimble portfolio
B. SF series supports storage snapshots and replication using veeeam backup and replication CS and AF series support storage snapshot only.
C. Inline deduplication for complete array capacity in combination with compression is offered by the AF and SF series only (67) need to check
D. 99.9999% availability measured and guaranteed for AF and CF series arrays, SF series array offer 99.999% availability.
Correct Answer: C
QUESTION # 2
Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?
A. RAID 6 triple parity is set up -21 data drives are used for RAID stripes.
B. RAID 6 triple parity is set up -18 data drives are used for RAID stripes.
C. RAID 6 or RAID 1 can be set up -24 data drives are used for RAID stripes.
D. RAID 6 or RAID 1 can be set up -18 data drives are used for RAID stripes.
Correct Answer: A
QUESTION # 3
A customer needs to manually map out preferred paths within a multi-switch fabric, based on application, priority, and topology while allowing failover to a non-preferred path if the preferred path fails, Which B-series FC switch functionality should be used to provide this?
A. Quality of services
B. Enhanced group management
C. Frame filtering
D. Traffic isolation Zones
Correct Answer: D
QUESTION # 4
Which 3PAR store serve feature allows hosting to continue I/O uninterrupted during a firmware update?
A. Persistent Memory
B. Persistent port (96)
C. Peer persistence
D. Persistent Cache
Correct Answer: B
QUESTION # 5
You are designing a solution that will have a new HPE Synergy frame and an HPE 3PAR StoreServ 8200 storage array with only the built-in ports. This new environment must keep the infrastructure within the data center to a minimum. Which interconnect module will achieve this goal?
A. Synergy 25-50Gb F8 Switch Module
B. 6125G/XG Ethernet Blade Switch
C. Synergy 20Gb Interconnect Link Module
D. Virtual Connect SE 40Gb F8 Module
Correct Answer: D
QUESTION # 6
A Company using an existing 1GB ISCSI storage array is experiencing a storage access performance issue. They are interested in deploying HPE 3PAR Storeserv with 16GB /S FC end-to-end to improve the performance with minimal changes to the environment. The existing environment consists of these HPE products
1. HPE C7000 Blade system platinum blade enclosure with HP virtual connect Flex 10 interconnect modules.
2. Configuration of HPE Proliant Gen8 and Gen9 blade servers
3. HPE 2920 Switches
Which HPE products must be included to support the new HPE 3PAR Storeserv? (Select two)
A. HPE B-Series 16GB SAN switch for HPE Blade system C-class series
B. HPE 16GB/s Fibre channel HBA for Blade servers
C. HP 5900CP switch series with 16GB/S SFP+ Modules
D. HPE Flex fabric 20GB,2-Port 630 FLB adapter
E. HPE Virtual connect Flex fabric 20/40 f8 modules
Correct Answer: AB
QUESTION # 7
Exhibit:
Which fabric design is shown?
A. meshed
B. single fabric
C. cascaded
D. core-edge
Correct Answer: A
QUESTION # 8
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual-port NICs are included in the configuration. You designed an Intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches. Which statement is correct when discussing the IRF limits for this configuration?
A. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.
B. A maximum of two switches can be used in an IRF stack when connecting storage.
C. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.
D. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.
Correct Answer: A
QUESTION # 9
A customer recently acquired another company and found that the existing infrastructure was outdated and costly to maintain. They need to put a complete infrastructure solution in place that minimizes the footprint in the data center as quickly as possible. Which solution do you recommend?
A. Simplicity 380
B. BladeSystem 7000
C. Converged systems
D. Synergy 12000
Correct Answer: A
QUESTION # 10
An HPE 3PAR StoreServ customer with FC, SSD, and NL, drives is facing extreme latency during peak business hours with an OLTP application. They have enabled tiering using all drive types. What could be used to resolve the issue?
A. Dynamic Optimization using tier 2
B. Adaptive Optimization using tier 1
C. Dynamic Optimization between tier 0 and tier 1
D. Dynamic Optimization using tier 1
Correct Answer: C
During a peak period when performance is critical, the VV can be optimized by moving to a faster disk and the RAID level.
QUESTION # 11
Which type of networking switch handles both Ethernet and fiber channel traffic?
A. Director
B. Virtual
C. Edge
D. Converged
Correct Answer: D
QUESTION # 12
Refer to the exhibit:
Which type of data format do you expect in the red rectangle?
A. 172.16.31.11/24
B. 94:b4:0f:cd:34:8a
C. iqn.2015-02.com.hpe:oneview-vcgeDav000
D. 20110002AC00736E235.524
Correct Answer: D
QUESTION # 13
A customer has a SAN infrastructure with an HPE C-Class blade enclosure, and a mix of ProLiant G7, Gen8, and Gen9 servers. They require a new storage platform. How can you confirm the new storage array will be supported in the existing environment?
A. Design an array with an older version of the firmware to ensure compatibility.
B. Document existing server and SAN information, and consult SPOCK to ensure firmware compatibility.
C. Design an array with the latest firmware, and recommend that the customer engage HPE PointNext to upgrade the existing hardware.
D. Check recommended firmware levels in the HP SAN Design Reference Guide to ensure firmware compatibility.
Correct Answer: B
Complete HPE0-S57 exam questions, on this website.
For other IT exam practice questions, stay tuned to passpundit.com.
